Product Detail

General. The new DB family of Digital Television Transmitters is fully compatible with international DTV standards (DVB-T, ATSC, ISDB, etc....) suitable for SFN (Single Frequency Network) and MFN (Multi Frequency Network) applications.

Output Power. The TDTV 60 gives a 60 W rms output power in continuous service in the whole III frequency band.

Digital Modulator. The TDTV 60 is equipped with a digital modulator (DVME-16) fully configurable, compatible with the international DTV Standards. It delivers the COFDM spectrum on a user defined frequency between 35 and 37 MHz. The spectrum bandwidth may be user configured to 8 or 7 MHz as required. Hierarchical modulation allows simultaneous transmission of two MPEG-2 transport streams.

Fully frequency agile with ultra low phase noise design. The Digital Modulator has an intuitive and easy to use interface to select the frequency without any readjustment needing.

Digital precorrector. A powerful digital linearity precorrector in the modulator combined with another one in the RF amplifier and a very selective output band-pass filter allow to obtain a perfectly clean spectrum in the adjacent channels and an excellent modulation linearity.

Phase noise. Very low phase noise oscillators allow to optimize the BER and MER performances.

Analog compatibility. The TDTV 60 is also available in analog version easily field upgradable to digital into the same rack or in dual-mode configuration locally and/or remotely selectable in analog/digital operation for maximum flexibility.

Metering. Full transmitter metering, control, setting and system diagnostic available in the front panel and (optional) remotely.

Filtering. Critical mask and non-critical mask filters available.


	TDTV 60 Digital Transmitters
	General. The new DB family of Digital Television Transmitters is fully compatible with international DTV standards (DVB-T, ATSC, ISDB, etc....) suitable for SFN (Single Frequency Network) and MFN (Multi Frequency Network) applications. Output Power. The TDTV 60 gives a 60 W rms output power in continuous service in the whole III frequency band. Digital Modulator. The TDTV 60 is equipped with a digital modulator (DVME-16) fully configurable, compatible with the international DTV Standards. It delivers the COFDM spectrum on a user defined frequency between 35 and 37 MHz. The spectrum bandwidth may be user configured to 8 or 7 MHz as required. Hierarchical modulation allows simultaneous transmission of two MPEG-2 transport streams. Fully frequency agile with ultra low phase noise design. The Digital Modulator has an intuitive and easy to use interface to select the frequency without any readjustment needing. Digital precorrector. A powerful digital linearity precorrector in the modulator combined with another one in the RF amplifier and a very selective output band-pass filter allow to obtain a perfectly clean spectrum in the adjacent channels and an excellent modulation linearity. Phase noise. Very low phase noise oscillators allow to optimize the BER and MER performances. Analog compatibility. The TDTV 60 is also available in analog version easily field upgradable to digital into the same rack or in dual-mode configuration locally and/or remotely selectable in analog/digital operation for maximum flexibility. Metering. Full transmitter metering, control, setting and system diagnostic available in the front panel and (optional) remotely. Filtering. Critical mask and non-critical mask filters available.




	TDTV 60 Digital Transmitters

	RF Data: Operating Frequency Range 174 - 230 MHz Output Power: TDTV 2 2 Wrms TDTV 10 10 Wrms TDTV 40 40 Wrms TDTV 60 60 Wrms TDTV 130 130 Wrms TDTV 400 400 Wrms TDTV 600 600 Wrms TDTV 1200 1200 Wrms TDTV 2400 2400 Wrms TDTV 4800 4800 Wrms Output connector: From 2 to 130 Wrms output power N (others on request) For 400 Wrms output power DIN 7/16” (others on request) For 600 Wrms output power EIA 7/8” (others on request) For 1200 Wrms output power EIA 1+5/8” (others on request) From 2400 to 4800 Wrms output power EIA 3+1/8” (others on request) Output impedance 50 W Shoulder attenuation > 38 dB Output frequency response ± 0.5 dB Network system adapters included in digital modulator MFN or SFN Digital Modulator Data Inputs: Serial data input (BNC connector, 75 W) 2 ASI inputs (Optional four ASI inputs available on request) Clock reference input: Amplitude 100 mV ÷ 3 Vpp Frequency 10 MHz within 1 PPM Connector type BNC Impedance 50 W / >1 kW user selectable Time reference input, SFN timing: Amplitude 0 ÷ 5 V Frequency 1 PPS Transition Positive edge Connector type BNC Impedance 50 W / >1 kW internally configurable Digital Modulator Data Outputs: Center frequency output From 30 MHz to 1 GHz in 1 Hz steps Output Frequency stability ± 1 ppm Output Level stability ± 1 dB Frequency response ± 0.5 dB (ref. to centre frequency) IF Output return loss > 16 dB with 50 W Harmonics and Spurious < -56 dBc MER > 40 dB Spectrum Polarity Inverted / not inverted - selectable by front panel menu Output bandwidth 6-7-8 MHz Metering: Forward and reflected power, DC voltages and currents, inlet air and heatsink temperatures Alarms: VSWR, over temperature, cooling system failure, overdriving; Power supply: 115/208/230/240 Vac±10%, 47 to 62 Hz single-phase or 208/220/240/380/415±10%, 47 to 62 Hz, three phases Operating conditions: Cooling Forced air with axial fans Operating temperature -5° ÷ +45° C Humidity 95% max Weight: TDTV 2 105 kg TDTV 10 120 kg TDTV 40 122 Kg TDTV 60 128 Kg TDTV 130 145 Kg TDTV 400 158 Kg TDTV 600 192 Kg TDTV 1200 405 kg TDTV 2400 810 kg TDTV 4800 1650 kg Size (WxHxD): TDTV 2 540x275x720 mm TDTV 10 540x405x720 mm TDTV 40 540x405x720 mm TDTV 60 540x405x720 mm TDTV 130 540x405x720 mm TDTV 400 540x550x720 mm TDTV 600 540x805x720 mm TDTV 1200 540x1480x840 mm TDTV 2400 540x1480x840 mm (2 cabinet) TDTV 4800 540x1480x840 mm (4 cabinet)

	ITEL S.r.l. TELECOMUNICATIONS AND BROADCASTING SERVICES Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY Tel. +39 0434 997667 - Fax. +39 0434 997687